Q:

R3M /R3 Review and Performance .WoW

Gentlemen;

First of all i want to apologize to Mr. Eduard and all of you, because i brought you incorrect info regarding the loudness of the new R3M, i told you that it is a little bit louder than my M-Rod, but it is not like this,

Okay, let talk about the loudness, what did you say? loud? Hey Hemn what sound are you talking about? 😯 guys if the Condor sound level is #5 and M-Rod is #2 then the new R3M is 0.75 😯 😯 on my point of view, because it is really really quite, yesterday when i did some practice in my fathers backyard all the sparrows and doves or even all birds they were on their position near at me on the trees when i was trying to do some chrony test, never moved and flied, believe me guys,
when i said that R3M is a little bit louder i was in my bed room 😯 😯 when i tried three dry fire,

Eduard you are correct as you told me dry fire is usually louder than fire with pellets …. sorry again…..

it is really really nice rifle and quite also more powerful than the R3,

guys you will be surprised when you see the below strings of the new R3M, here we go……………………………………….

Date Oct 12th 2013,
Edgun Matador R3M, .22 cal, starting pressure was 220 bar as mentioned in the manual.
Pellet; JSB 18.13gr

Eduard please tell me am i sick or these fps are correct ?

Shot# FPS

1 – error
2 – error
3 – 1012 the muzzle was near from the chrony about 50cm the i put the chrony after this shot 60cm away from the muzzle.
4 – dry fire by mistake
5 – 1003
6 – 1003
7 – 1003
8 – 1004
9 – 1005
10 – 1001
11 – 1003 Pressure was 200 bar
12 – 1009
13 – 999.5
14 – 1002
15 – 1001
16 – 1000
17 – 1004
18 – 999.7
19 – 998
20 – 1006 Pressure was 185 bar
21 – 1007
22 – 1003
23 – 1000
24 – 996.2
25 – 1000
26 – 1002
27 – 1000
28 – 1003
29 – 998.1
30 – 999 Pressure was 172 bar
31 – 1002
32 – 998.2
33 – 993.7
34 – 994.9 my place was very very bad for testing my gun so, i had to pull the gun toward me in order to get the perfect position for aiming the target, so, i believe those shots under 999fps occurred because of that.
35 – 995.9
36 – 999
37 – 997
38 – 999
39 – 999.2
40 – 997.9 Pressure was 155 bar
41 – 1011
42 – 997.1
43 – error
44 – error
45 – error
46 – error
47 – error
48 – Fucking error
49 – Fucking error
50 – Fucking error i believe due to the sun set the chrony wasn’t able to read. the last pressure was 145 bar

The average of the total of 39 shots = 1001.2 fps. ( i got the fps of 39 shot that is why i am calculating only 39)

the accuracy is very good out of 40 mtr for me ( since i am a new one to Bullpup and such a high quality of the gun )

Dear Sir Ville; when you read my review you will understand that there are a huge difference between R3 and R3M.

Dear Trygve; please go back to your home and let Mr. Martti ship your new R3M.

I will post the pics of the targets latter…..

Hope other guys who got their R3M share the new info ……………………

EdGun

All Replies

Viewing 15 replies - 136 through 150 (of 265 total)

1 2 3 9 10 11 16 17 18

Guys;

today afternoon, i did some chrony test and target practice as well, i have fired 40 shots, pressure was 225 bar dropped down to 175 bar with 40th shot, now i become to understand that my matador eats 10 bar for ten shots, here is the strings;

1 – error 225 bar the reason that i filled to 225 is outside temperature was cooler than my home,
2 – 903.9
3 – 925.5
4 – error
5 – error
6 – error
7 – error
8 – error
9 – error
10 – error 210 bar
11 – 912.4
12 – 911.7
13 – 908.1
14 – 901.6
15 – 907.8
16 – 910.7
17 – 899.4
18 – 912.7
19 – 910.4
20 – 910.9 195 bar
21 – 902.4
22 – 910
23 – 900.6
24 – 902.6
25 – 899.5
26 – 899.5
27 – error
28 – error
29 – error
30 – error 185 bar
31 – error
32 – error
33 – error
34 – error
35 – error
36 – error
37 – error
38 – error
39 – error
40 – error 175 bar

the average for the 18 shots is 907 fps.

i think the time is becoming closer to touch the regulator, i don’t like the consistency of the shots.

thanks ….

Dear Brother Wingman NZ;

you are totally right, i believe what you said and suggested to me, but not Donnie’s comment just ignored, hahaha, i am joking, Donne we are missing you, nice to here you again brother….

i will try to find out the time and do the adjustment,,,

Brother John;

okay let make a deal with you, i will sell my R3M for free to you, but if you could to find a way to ship my gun from Iraq to your country ❓ ❓ ❓ πŸ’‘ πŸ’‘ πŸ’‘ πŸ’‘ πŸ’‘

i don’t believe until the dooms day you will be able to find the way how to export from Iraq and import to your country…. that day (dooms day) there will no any border and you won’t be able to safe yourself, and my rifle is just waiting to be taken from some one in you post box.

quote donnyfl:

Those are some crappy numbers Hemn. I hate to break it to you but I think you should contact the distributor and get a new regulator. By the time you get the new one, Donnyfl will be shooting his R5M bang bang bang πŸ™‚

Hi Hemn,
I think Donnie is just kidding with you man. There is nothing wrong with your regulator. It is the desert sand that got into your air system. I think the whole gun is now ruined.
Just sell me your R3M, and upgrade to a new R5M. πŸ˜† πŸ˜† πŸ˜†

Hi Donnie,

It is nice to hear from you again. I am just glad the hurricane/typhoon did not made to Florida. How was your cruise trip? Just to let you know, this place is not the same without Donniefl.

John P

Lol…Hemn… there is nothing wrong with your reg.. For a rifle that is still breaking in 9 fps extreme spread over that number of shots is fine. Even a variation in the pellets could cause that small fluctuation in velocity. If however the strings become erratic it is normally caused by backing the hammer spring tension off too much. The HST works together with the reg and only have a small window where they work well together.. with the reg turned up too high and the hammer spring backed off too much it wont be consistent. Try turning the HST back up a quarter turn and re test 10 shots. If you want less power you may have to drop the reg pressure just a touch so it works within the range of you HST again.

Those are some crappy numbers Hemn. I hate to break it to you but I think you should contact the distributor and get a new regulator. By the time you get the new one, Donnyfl will be shooting his R5M bang bang bang πŸ™‚

Guys;

Today afternoon i took my Edgun to do some target practice, count the shot numbers and velocity testing as well,

there was a wind but not strong, but had affect on pellets for my target 55 yards away, for sure, anyhow, however my fucking chrono was not working very well, i don’t know why?

i got some shot velocity they were between 915.5 fps to 924 fps, this time i didn’t like my strings and the groups as well, they were not like before, why i don’t know? ❓ ❓ ❗ ❗

i got 90 shots, the starting pressure was on 220 bar down to 120 bar, see below;

i started with 220 bar

1st 10 shots pressure gauge was on 210

2nd 10 shots pressure gauge was on 195

3rd 10 shots pressure gauge was on 185

4th 10 shots pressure gauge was on 170

5th 10 shots pressure gauge was on 160

6th 10 shots pressure gauge was on 150

7th 10 shots pressure gauge was on 140

8th 10 shots pressure gauge was on 130

9th 10 shots pressure gauge was on 120

however all end pressures was very perfect , but as i noticed the shots velocities were not close together, ❗ ❗ ❗ ❗ ❗ as i said they were between 915.5 – 924 fps,

as i mentioned before, i turned HST 1, 1/2 off.

guys, any suggestions and advises are very much welcome….

quote knifemaker:

And for the weaker among us, the Yellow was created. It is the kinder, genteler place. Panzie haven. πŸ˜†

Amen. Pax Vobiscum. :8:

Kurth – where i come from (and iΒ΄m not a coward Swede :mrgreen: ) we admire bravery and courage. You have shown both by first picking up a fight with me and that crazy,cheap bastard H 😯 😯 T. ThatΒ΄s bravery. Now youΒ΄re back and apologize. That shows courage.
For my part the fuzz is hereby forgotten. 😎

It’s very nice to see Kurth back and be friendly. It’s so hard to do so. Nobody is perfect. I’m learning some thing from you guys, not only your knowledge on the guns, but also how to be a man to be strong inside and out. :8:

WoW Brother Donny,

i really missed you brother, where were you? believe me i was on writing a topic (Where are brothers Trigvy and Donny?) i really miss you both, yes, you are correct i am an ugly man, but my heart is beautiful 😎 😎 😎 , i can be nice with others…. πŸ˜€

regarding the receiving an email from an anonymous lurker, to be honest with you… scroll down
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
i didn’t get it yet, hahahaha πŸ˜† πŸ˜† πŸ˜† πŸ˜† πŸ˜† i am lucky, as i got my R3M before you….. 2 for me and zero for you brother πŸ˜› πŸ˜› πŸ˜› πŸ˜› πŸ˜› πŸ˜› :8: :8: :8: :8:

quote donnyfl:

Hemn you hairy camel cock sucker, you’re just as ugly as the Bobcat but I like you πŸ™‚ See Kurt this is the only place you can bend someone over, give it to them real deep and hard and they turn around and give you a high five. That’s just the way this particular forum works. Only the strong survive, all the weak ones tucked their cocks between their legs and left. Once you get to know these guys, you’ll see that they have other guns other than the Edguns and Crickets. Bashing the Bobcat was not due to its performance but appearance. It got to the point where even FX took notice and currently modifying it. I am sure you’re already aware of it. I personally like the looks of it but prefer the .25 cal to be shorter.

Till this day I don’t understand why I received an email saying from an anonymous lurker that I post just to post and Hemn didn’t get one πŸ˜›

I was on a cruise all last week with no internet connection 😯 Tell you the truth, I was missing this forum. Glad to be back :8:

And for the weaker among us, the Yellow was created. It is the kinder, genteler place. Panzie haven. πŸ˜†

Hemn you hairy camel cock sucker, you’re just as ugly as the Bobcat but I like you πŸ™‚ See Kurt this is the only place you can bend someone over, give it to them real deep and hard and they turn around and give you a high five. That’s just the way this particular forum works. Only the strong survive, all the weak ones tucked their cocks between their legs and left. Once you get to know these guys, you’ll see that they have other guns other than the Edguns and Crickets. Bashing the Bobcat was not due to its performance but appearance. It got to the point where even FX took notice and currently modifying it. I am sure you’re already aware of it. I personally like the looks of it but prefer the .25 cal to be shorter.

Till this day I don’t understand why I received an email saying from an anonymous lurker that I post just to post and Hemn didn’t get one πŸ˜›

I was on a cruise all last week with no internet connection 😯 Tell you the truth, I was missing this forum. Glad to be back :8:

My Dear Brother Kurth;

you are one of our brothers here, you please don’t apologize to me, i consider that never anything happened between us, i forgot everything long time ago,

my brother Kurth, this life is too short to site and think what people saying against you, and start hating them, or make revenge, i already forgot and believe me i like you more than before πŸ˜› πŸ˜€ πŸ˜€ , your apologizing means/ showing that how great and understanding man you are, you are a nice man, we like you and even all, i joined this forum in Jun, and found a plenty of really really nice and helpful guys, i do appreciate their help and loves towards each other.

we are human been, we some time make mistakes and the greatest thing is correct our mistakes, (((and the biggest mistake is that you don’t know that you don’t know ))) sorry for my poor english if i couldn’t express my words to you my brother, i have no word to send you with my love to you… you are a kind member here….

still i want to tell you i am sorry if i did a mistake against you….

quote kurth:

Right folks….

I wanna apologize.

Maybe I don’t get your humour, maybe you don’t get mine….

I see you’re all a close community, and I see you all love your Edguns, and your other Edguns and some love your crickets.

Sorry I offended you Hemn, Hoot, and Sir Ville etc….

Cheers

Kurth

Everyone here is a jokester. 99% of everything is said in fun whether we’re dogging you or not…and 99% of everything should be taken in just that way. I say you jump right in and take a stab at any one of the wonderful characters we have on this site…including me. (But I’m not so wonderful)

Right folks….

I wanna apologize.

Maybe I don’t get your humour, maybe you don’t get mine….

I see you’re all a close community, and I see you all love your Edguns, and your other Edguns and some love your crickets.

Sorry I offended you Hemn, Hoot, and Sir Ville etc….

Cheers

Viewing 15 replies - 136 through 150 (of 265 total)

1 2 3 9 10 11 16 17 18
  • You must be logged in to reply to this topic.