The Airforce Bottle Regulator is here!
Ladies and Gentlemen,
I am pleased to announce that the Airforce bottle regulator is complete and I have the distinct honor to offer them for sale.
They have the M18 x 1.5 threadpitch for the Airforce bottle on one end and the .875-20UNEF threads for the E-TaCREG on the other.
The length and diameter are identical to the other JDS Airman regs.
I will be stocking them here at E-TaC central. The cost is $90 shipped, same as the E-TaCREG. CONUS shipping is included.
You can choose your output pressure from 1200-2500psi.
Here is a picture.
I have to get my tank filled (AGAAIN!!!) and I’ll get a shot count number for the 2000psi output.
Regards,
Jim
All Replies
SWEET JESUS!!!!!!!!!
You want to shoot those??
I’ll have to get some to try.
Jim
I have:
JSB Exact Kings
Beeman Kodiak Extra heavies
Benjamin 27.8
Beeman Crow Mags
Eunjin 43.2
Eunjin 35.8
What are the Nine Rings you speak of LMTSS?
Beneeb0y: I wouldn’t think you’d loose near 100fps going to a 18″. Closer to 40fps in my testing.
Digi2496: I adjusted the PW all the way down on the 2kpsi reg and was shooting in the 550’s with 15.8 JSB so 715fps is easily obtainable. The 1400psi reg was shooting them at 873fps. I would go for the lowest psi reg for most shots.
Jim
These
Link to page
http://talonairgun.com/forum/viewtopic.php?t=3929
Digi2496: I adjusted the PW all the way down on the 2kpsi reg and was shooting in the 550’s with 15.8 JSB so 715fps is easily obtainable. The 1400psi reg was shooting them at 873fps. I would go for the lowest psi reg for most shots.
Jim
Again, thx so much and sorry for my terrible english… So, I try to explain what I need by a private email……
:18: :18: :18:
Thanks guys.
I have:
JSB Exact Kings
Beeman Kodiak Extra heavies
Benjamin 27.8
Beeman Crow Mags
Eunjin 43.2
Eunjin 35.8
What are the Nine Rings you speak of LMTSS?
Beneeb0y: I wouldn’t think you’d loose near 100fps going to a 18″. Closer to 40fps in my testing.
Digi2496: I adjusted the PW all the way down on the 2kpsi reg and was shooting in the 550’s with 15.8 JSB so 715fps is easily obtainable. The 1400psi reg was shooting them at 873fps. I would go for the lowest psi reg for most shots.
Jim
Who’s next?
Jim
Okey, the next one: To get an ave=715fps with a hiflow valve, stock condor cal.22 and JSB 15.8gr, is it possible????
Thx.
2500 The nine ring 88.8 gr .25 slugs that Jerry sells, please 😀
I would like to see .25 at 2500 and 2000 also, I have a 21″ so it should be close. pellets
JSB Match Diabolo Exact King 25.4g
H&N Field Target 24.38g ,
Beeman Kodiak Extra Heavy 31.02g (H&N Baracuda 31.02g)
beneeb0y: I’ve only got a 24″ barrel in .25. Any particular pellet? I’ve got a few different kinds.
Beneeb0y has stepped up to the plate with a suggestion, and I’ll get right on it.
Who’s next?
Jim
That’s cool. I have an 18″ barrel so I just minus 100fps to get a general clue.
What ya got??? I’de like to see a heavy pellet (43 EJ or higher) and light pellet(JSB 25 or H&N 30).
Valve was a stock AF Hi-Flow on a stock condor frame.
beneeb0y: I’ve only got a 24″ barrel in .25. Any particular pellet? I’ve got a few different kinds.
Beneeb0y has stepped up to the plate with a suggestion, and I’ll get right on it.
Who’s next?
Jim
.25 cal 2500psi reg purdy please 😆
CONGRATULATIONS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Please, I have a little question: Which valve did you use to test: the hi_flow, the spare or the micrometer one???????????
Thx & good job!!
😛
OK, boys.
Used two different tophat settings. 24″ 22cal 2000psi output AF bottle JSB 15.8 lubed with FP10
Setting 1: 33 shots ave 996fps SD: 6.7
998
1003
1004
1001
1002
1004
1002
1004
1002
1000
1004
1000
998
1001
993
993
1002
986
992
997
995
992
1004
992
981
1001
995
979
996
988
990
993
Setting 2: 24″ 22cal 2000psi output AF bottle JSB 15.8 lubed with FP10
51 shots at 970fps ave. SD: 4.5
976
973
971
971
976
972
971
967
979
973
975
973
973
976
975
974
976
963
971
977
974
971
974
971
973
972
978
976
978
967
971
971
972
973
969
969
968
968
964
967
967
967
967
967
967
965
965
961
964
961
What barrel/pellet/psi output do you want me to test next?
Jim
😆 Besides the DOT stuff there are no other laws. Everything else was made up by the diving community.
Honestly, I am confused.
The tech (with owner standing there) said he could not fill ANY tank without a current Visual Check sticker on it when I took it in yesterday. Today I got the call that it was done. Went to pick it up and it was full, but no Vis Check sticker (??) Told them they better put one on it so I don’t have to go through this again. Guy who’s been doing this for many years told me that there is no need to do a Vis Check on a non-breathing cylinder.
They didn’t charge me anything for the Vis Check; I’ve got my sticker, and I’m full of air.
Jim
- You must be logged in to reply to this topic.
You want to shoot those??
I’ll have to get some to try.
Jim
Yup they make great targets. 😆
Seriously though they are great for woodchucks, rabbits and chipmunks.