Q:

The Priest Review…

Here’s a link to the Priest review..https://www.youtube.com/watch?v=zN-_Ss42RLs#t=889

Pre-ordered the black/silver in .177.

BullPup General Chat

All Replies

Viewing 15 replies - 211 through 225 (of 352 total)

1 2 3 14 15 16 22 23 24
quote RickM:

Sure the thing is ugly…but it’s not like I’m taking the fuckin thing out to dinner. :biggrinn:

Great thinking! You know what a fancy dinner leads to, don’t you. That would be kinky no matter how the gun looks like ..

Skickat från min iPhone med Tapatalk

Sure the thing is ugly…but it’s not like I’m taking the fuckin thing out to dinner. :biggrinn:

quote Sir Ville:

quote Jman2311:

I have not been here for long and I can tell from previous posts that seniority is a source of pride for a few here but gents I have to ask, is it just a matter of opinion to keep beating this dead horse or do you guys just enjoy bitching? Obviously an Indonesian company making Impact knock-offs isn’t RTI arms. I don’t understand what anyone get from consistently proclaiming that 1 modern designed bottle bullpup is a copy of the other when most other PCP guns have a very similar form factor. If you have something to contribute to the review like ways to achieve adjustibility or why it shouldn’t be done then by all means contribute. If bitching about something is all you want to do then I ask you, go elsewhere. I look to here for experienced advise, not crying.

Contribute with advice ? Pretty hard to do since the Preacher isn’t even out yet, don’t you think ? And many of us “seniors” have contributed more than you probably ever will to this very forum. There’s a wealth of knowledge among “seniors” here – the kind that isn’t to be found by watching some YT videos but rather from years of experience in guns/PCP’s.
The only one whining or bitching is your sorry ass just above. The other stuff is the usual lingo when a ” new greatest thing ever to the world of PCP’s” arrives and people get overly excited and start to estimate and quess things.

If that’s too much for your sensitive skin then fuck off and over to Air Cunt Nation you go. Such intolerable cruelty isn’t allowed there.

Skickat från min iPhone med Tapatalk

Well articulated Ville,….

Didn’t even realize it was his first post 🙂
It was my mild mannered reaction to the “senior” talk.
Anyway : Welcome to the world of TAG ! Long live the freedom of speech 🙂

Skickat från min iPhone med Tapatalk

Damn ! , Ville , hope you didn’t Butt hurt Jman 2311 too badly , remember it is only his first post and you smacked him
pretty good . By the way Jman try to chill out a little bit and stick around . If you do , you will learn more about airguns
on this forum than you will anywhere else . Just keep one thing in mind that on this forum you and all of us members
are not censored and we are allowed to use our Freedom of Speech even if the wording seems harsh . :tag:

FROM : THE BIRDMAN

quote Jman2311:

I have not been here for long and I can tell from previous posts that seniority is a source of pride for a few here but gents I have to ask, is it just a matter of opinion to keep beating this dead horse or do you guys just enjoy bitching? Obviously an Indonesian company making Impact knock-offs isn’t RTI arms. I don’t understand what anyone get from consistently proclaiming that 1 modern designed bottle bullpup is a copy of the other when most other PCP guns have a very similar form factor. If you have something to contribute to the review like ways to achieve adjustibility or why it shouldn’t be done then by all means contribute. If bitching about something is all you want to do then I ask you, go elsewhere. I look to here for experienced advise, not crying.

Contribute with advice ? Pretty hard to do since the Preacher isn’t even out yet, don’t you think ? And many of us “seniors” have contributed more than you probably ever will to this very forum. There’s a wealth of knowledge among “seniors” here – the kind that isn’t to be found by watching some YT videos but rather from years of experience in guns/PCP’s.
The only one whining or bitching is your sorry ass just above. The other stuff is the usual lingo when a ” new greatest thing ever to the world of PCP’s” arrives and people get overly excited and start to estimate and quess things.

If that’s too much for your sensitive skin then fuck off and over to Air Cunt Nation you go. Such intolerable cruelty isn’t allowed there.

Skickat från min iPhone med Tapatalk

I know where that’s at, Its right on the Texas border,
Miike :rofl: :rofl: :rofl:

quote Cricket:

It is made in Slovenia

It is made in Slovenia

Dam I do not know where the Priest is being made.
Indonesia is not a bad place to have an airgun made, They have some very fine craftsman there, There is three videos I only posted one,,
I do not care and I am not saying the Priest is a knock off of the FX impact,,, I do not give a shit as long as its simple accurate and half the price.
The FX Impact was been known as the most complicated air gun made… STOP THE SALE, I want no part of it…
The Priest seems to be a simple gun, I am a BIG fan of simple.
SO just where in the World is the Priest coming from?
I am sorry I can not tell you what twist the barrel will be, weight of the gun. shot count,
I am just passing on information that might help,
Lighten up people I am on you side .
In the PCP sport, wanting more and better guns
And broke as hell.
My china Atlas bipod works just as good as my USA atlas bipod 39 dollars V/S 280 dollars, Screw once but not twice.
Mike

The 22 cal is listed as 45J by RTI and the 25 cal is listed at 60J (33 and 44 FPE). I’m wondering if there’s anything else that affects/controls power between the two other than reg setting and spring/hammer. So if you had a .22 with reg set to 150 bar and the .25 spring/hammer setup would it make 44 FPE? Or might there be some other factor (transfer port size, etc.)?

I have not been here for long and I can tell from previous posts that seniority is a source of pride for a few here but gents I have to ask, is it just a matter of opinion to keep beating this dead horse or do you guys just enjoy bitching? Obviously an Indonesian company making Impact knock-offs isn’t RTI arms. I don’t understand what anyone get from consistently proclaiming that 1 modern designed bottle bullpup is a copy of the other when most other PCP guns have a very similar form factor. If you have something to contribute to the review like ways to achieve adjustibility or why it shouldn’t be done then by all means contribute. If bitching about something is all you want to do then I ask you, go elsewhere. I look to here for experienced advise, not crying.

Priest, Vicar, Rabbi or Mujahedin . Who knows, who knows .. 😉

Skickat från min iPhone med Tapatalk

Lots od chatter over on AGN about a little company making knock offs of the FX impact
Could it be the Priest?
https://www.youtube.com/watch?v=HcERF8vxwKU
Mike

quote steeldreams007:

Why is this talk about Ugly on a gun with a religious name as the Priest?

What makes you think the name has any thing to do with religion?
https://www.houseofnames.com/priest-family-crest

:rofl: You guys make my day

Viewing 15 replies - 211 through 225 (of 352 total)

1 2 3 14 15 16 22 23 24
  • You must be logged in to reply to this topic.