Visit Talon Tunes
Updated on October 22, 2015
Inactive
October 22, 2015 at 4:55 am
Q:

My EdGun Matador R3M 22 cal

I received my Matador (01/05/2014) in absolutely perfect condition and in 3 days ! :mrgreen:
I enjoyed talking to Tony R, he is easy to joke around with so much so I forgot to order some extra Brass rings ! 😳

2+3 extra mags, 2 valve stems and an extra fill probe.

I fill to 220 bar and shot down to 110 bar using JSB 18g, here the out of box chrony results with a 920 fps average.

I refilled to 200 bar and got 50 good shots down to 120 bar.
I haven’t cleaned the barrel yet, 5 shot group at 50 yards with little wind.

5 shot group 75 yards with little wind.

At rest on my chrony/work bench, I can’t wait for this weekend hopping it doesn’t rain !! :mrgreen:

Thanks for l@@king !
~ Greg

EdGun

All Replies

Viewing 15 replies - 61 through 75 (of 111 total)

1 2 3 4 5 6 7 8
Anonymous
Inactive
November 26, 2015 at 1:24 pm

Cool software I downloaded and installed the free version, Happy Thanksgiving !!
http://www.ontargetshooting.com/download1.html

~ Greg

Anonymous
Inactive
November 13, 2015 at 7:52 am

Dang, that AT ping sure got noticeable ever since I stifled up the muzzle blast !

Any good or better do it yourself Depingers then Teds Vinyl Hose down the AT install ?

~ Greg

Anonymous
Inactive
November 13, 2015 at 7:51 am
quote xbangu:

That look very nice Greg! you are talented.

Thanks Xbangu !

~ Greg

xbangu
Participant
November 12, 2015 at 1:17 am

That look very nice Greg! you are talented.

Anonymous
Inactive
November 12, 2015 at 12:06 am
quote LarryW22:

Greg, are you using a similar system to Ed’s tension nut when attaching the CAN? Have you had many alignment issues? Your shooting partner is having a very very good birthday!! Amazing creation, thanks for sharing.

Regards
LarryW 🙄

Thank you Sir !

Yes, and it also allows the air pressure to back follow into the factory shroud.
But mines doesn’t show the connection joint onto the shroud, it looks seamless.

The muzzle hole and the internal first stage on my designs are very close to the actual caliber size to be effective enough in sound suppression for its volume.
I have to install it for him to check the alignments, because of which it needs a custom tweak for each unique gun and its tuning.
I have a method and precise jigs to check for exact alignments of all internal parts when making and after when installed onto the gun also.

After which I haven’t had any issues with clipping with any I’ve made for all my other Airguns so far.
But than, there’s nothing that beats him trying to out do himself at 100+ yards on paper he did before the new mod was added.

That is the main reason why I can’t seem to offer mine for sale, it’s just to hard for me to assume every owner can easily calibrate it themselves.

~ Greg , p.s. my friend said he is going to be the driver for us for a year when we go out to the farms to do pest control ! :mrgreen:

larryw22
Participant
November 11, 2015 at 11:38 pm

Greg, are you using a similar system to Ed’s tension nut when attaching the CAN? Have you had many alignment issues? Your shooting partner is having a very very good birthday!! Amazing creation, thanks for sharing.

Regards
LarryW 🙄

Anonymous
Inactive
November 11, 2015 at 10:51 pm

The offset LDC you see in front was given to my shooting buddy for his birthday yesterday.
It’s for his Eddie 25 cal and yes it’s caliber specific and a bit longer as well.

Guys, you should have seen the expression on his face when he opened the box,,,, ,, he thought he was getting more condoms ,, ,, , it was priceless !!! :biggrinn:

~ Greg

Anonymous
Inactive
November 11, 2015 at 4:52 am
quote ElmerFudd:

Are you using medium height rings now?

No, their low 24mm to center of scope tube and 54mm to scope center to bore.

~ Greg

elmerfudd
Participant
November 11, 2015 at 2:16 am

Are you using medium height rings now?

Anonymous
Inactive
November 11, 2015 at 1:59 am

Thanks guys !

Not having to actually possess a Ed’s version I don’t know its specs.

But mine I made from stock that I had laying around my shop.
Mines is a fat boy and measures 1.7″ = 43mm OD and has a OAL of 6″.
The muzzle hole I made a couple hundreds smaller than the OEM and is .25″ in diameter, I closed/taped off all but 2-3 back port holes on the back of the shroud.

ya, I refuse to go higher so I need to move my scope back a 1/4″ or so for the cap lid to clear.

Did I mention that it’s very quiet, I can hear the pellet sizzling out of the muzzle ! 😆

~ Greg

larryw22
Participant
November 10, 2015 at 4:38 pm

Mad skills, Greg, waiting with anticipation on the detail!!!

Regards
LarryW :mrgreen: 🙄

elmerfudd
Participant
November 10, 2015 at 3:13 pm
quote GKU:

It looks really good man. Externally, it looks exactly like the one Ed designed. Is it the same outside diameter as Ed’s? How much clearance do you have with your scope caps?

nefarion
Participant
November 10, 2015 at 10:31 am

Superb! !

Anonymous
Inactive
November 10, 2015 at 9:28 am

I just completed my homemade Offset LDC, it doesn’t add length to the standards OAL.
The internals are a bit different then the OEM, and is more quieter now just as quite as my Cricket 22 std with a Donny’s slip on tuned to the same fpe !
I can’t give all the 411 on this one guys, sorry it’s not for manufacturing and sale !

thanks for l@@king !

Woo hoo, bang bang, pew pewwwwwwwwwwwww………. :mrgreen:

~ Greg

Anonymous
Inactive
November 10, 2015 at 2:07 am
quote keyser soze:

I do the same as Robert, slide an O ring behind the locking collar. Never comes loose.

Thanks Keyser soze, I’ll try it again.

~ Greg

Viewing 15 replies - 61 through 75 (of 111 total)

1 2 3 4 5 6 7 8
  • You must be logged in to reply to this topic.