Mystery Box!!!
Wife called to tell me that a mysterious box was delivered home!
I arrived and saw it. Was waiting for it for long time
I opened the box and it’s love at the first sight!!!
It’s my new 25 Cal Vulcan!
Now the discovery journey will start!
All Replies
What is the safety problem you refer to. Mine seems to work fine. Am I missing something?
One observation as I opened the gun is that the assembly is very dry. No sign of grease or oil. What do you suggest? Would a spray of Ballistol do it?
I quess yours is fixed from the factory. Evgeny updates things when needed so yours may not need any attention. Needed did mine although it´s one of the very first made – Nr 3.
My safety was also a problem.
Sounds like you will definitely need to adjust he trigger. I am very interested to know if your trigger linkage rod is one that actually allows length adjustment. Mine doesn’t’.
Oh yes, it sure does. Just loosen the rod from the trigger mechanism and turn the needed side (trigger blade or mechanism side – or both for that matter) untill your liking. :winkn:
Thanks Lurker & Guykuo
What is the safety problem you refer to. Mine seems to work fine. Am I missing something?
One observation as I opened the gun is that the assembly is very dry. No sign of grease or oil. What do you suggest? Would a spray of Ballistol do it?
You’re going to love it once you have it adjusted and modded.
My safety was also a problem.
Sounds like you will definitely need to adjust he trigger. I am very interested to know if your trigger linkage rod is one that actually allows length adjustment. Mine doesn’t’.
No case ❓
That’s a new one. 😯
I’d call someone a cheep bastard but they might void my warranty :rofl:
It’s a beautiful thing anyway.
If you work on the trigger you might as well do the safety at the same time.
For me one of the two trigger adjustment screws at the rear was on the short end of travel so I switched them. But so far no one else has done that.
The safety slide may need a little honing and the trigger link shortened so the safety can easily be set before cocking.
If you remove the safety slide to smooth it out, be careful as it has a tiny spring and detent ball bearing under it.
You are in for some great shooting 
OK first impressions:
1- The look is great. Better than what I expected and I had high expectations.
2- Where is my case? May be they stop shipping vulcans with cases.
3- The trigger needs some work. First stage very short and trigger does not go back to original location if I back out during first stage.
4- The action can be smoother.
5- Its louder than my other PCPs but hey its my first 25 Cal
6- Can’t wait tell the weekend to start target shooting (I cant fire this in backyard).
7- I am going inevitably to be comparing it to my favorite gun the cricket standard 22 with skeleton stock.
- You must be logged in to reply to this topic.
That’s a new one. 😯
I’d call someone a cheep bastard but they might void my warranty :rofl:
Do we know if ATG stopped including them in new shipment? I got my gun from WWAG