Re: Matador Reg kit to get .25 34gr JSBs up to speed
The EDgun regulator is one of the best in the world. It is straightforward and efficient. The regulator is capable of almost 1 FPS extreme spread. Wingman did an excellent video where he showed that variation is caused by external factors, not the regulator. So the Huma advantage comes from its low profile, this gives more volume in the plenum. I would put it on par with the Edgun regulator regarding efficiency
In the standard, the speed I can achieve realistically is 790 to 810 with the Huma and 34s. The long will hit about 830 max. I don’t like the current set up, and I would like to run the regulator at 120 and get speeds of 880 in the long with 34s. I have some ideas how to do it, and Wingman is going to help.
So be patient I am working on a solution to get more speed and not redline the capability of the Matador
All Replies
Ok, so the fact is that ED’s .25 barrel is the correct choice for JSB King Heavies and a power kit, right?
Does anybody know if the new “tuning parts” if they will prove to work as expected make it into production of the new guns or will the tuning remain on a distinct selling track?
Thanks.
I purchased my matador used… So no sales that I’m aware of. I’m somewhat shocked at how well I actually like the gun. Was expecting much less.
Regards :angrymob:
Don’t be surprised, Edguns are nice guns, I know because I had many of them.
Now apparently they also cycle well and apparently also the trigger became nice, I’m tempted to buy another Matador just to see the “new state of the art” but probably I will hold back waiting for the new guns.
Meanwhile I enjoy reading :fishinghole:
Dearest cousin pippy ,
I purchased my matador used… So no sales that I’m aware of. I’m somewhat shocked at how well I actually like the gun. Was expecting much less.
Regards :angrymob:
The next test will be with the 25 grain .22 caliber pellet. The thing that makes Ed’s Matador so unique is that the gun is expandable.
And yeah troll, nothing sells new guns faster than upgrading old ones genius
Is there some kind of ongoing sales on the old guns before the new Edguns arriving?
“The best have yet to come”! 😀
The Huma/PWR Plenum Kit will be going in my Matador ASAP.
My new to me.25 short arrived Saturday morning :8: It shoots so well I may hold off from fuxing for now or I might buy another matador in the future for fuxing with :whistle:
.25 Matador R3M Standard on way!! Excited over here!!!
Hope to see them in the USA in a week or so
Well it looks like I need to score a .25 Matador R3M. Realistically, when are these kits going to be available to the public?
Im not sure If I can dumb it down any more for you Shooter3.. I just gave you my conclusions in the last posts
Fellas I’m gonna be hones…… All these BSA post have given me the weirdest boner :confusedn:
So what are the conclusions? Please write more about LW vs TJ vs BSA.
- You must be logged in to reply to this topic.
Wingman, I know on powder burners, u have different twists for diff weights 1:7 75/76gr 1:9 for 50/45/40 gr (for example). Is there a guidline rule for airgun barrels and twist rate? given the diablo pellet design with skirt if the similar rules apply.
reading through your posts, the heavier pellet wants a faster twist rate for long range stability. so if i am following the pattern, a .30 50gr would like a 1:12 1:10 if you can keep velocity up?